Reference sheet
Compare common nozzle and layer-height relationships before choosing a slicer profile.
Change any field to update the information below. Your entries stay in this browser session.
This checks a geometric relationship, not whether a profile is safe for every printer. Use a tested slicer profile for your exact machine, nozzle, and material.
Layer height ÷ nozzle
50%
Balanced starting range
80% reference ceiling
0.32 mm
Prusa recommends keeping layer height below 80% of nozzle diameter and notes that it cannot exceed nozzle diameter.
Use manufacturer settings as tested starting points. Confirm them with your exact machine, material, and supplier instructions before production.
Documents layer-height tradeoffs and the recommended maximum below 80% of nozzle diameter.
Estimate material cost per 3D print from weight and spool price.
Open calculator →Rough FDM duration from model volume and slicer settings.
Open calculator →Estimate resin material cost per print using slicer weight, bottle price, and a realistic waste allowance.
Open calculator →